How do I determine if my boat horn is broken or it's not properly wired? - boat horn torrent
My horn does not work. If you use an ohm meter to check the continuity of the son of the horn, which shows no continuity. In examining the tension cable end (speaker-independent), expressed the tension between $ 0.13 and once again proved to the horn button, I checked the voltage to zero, then back to 0, 13 after the switch output. It is a 12V system, btw.
Wednesday, February 3, 2010
Boat Horn Torrent How Do I Determine If My Boat Horn Is Broken Or It's Not Properly Wired?
3 comments:
Points or contacts in the horn are rusty and no .. does not work, take the horn of the ship and go directly to the battery cable. If this does not ring, you have to buy a new horn ... You can do whatever you want the voltmeter, but it is the best way to know whether the horn work ..
You need 12 volts to a terminal and ground the other side. You should have no tension in the Horn, when the switch is not pressed, and at least 12 volts, as it is. The switch should be 12 volts and 12 volts, if you pressed, the ground is not lit.
right horn try the battery if it works or fiber optic cabling to press, so remember to change the country as a car
Post a Comment